Schwinn A10 Upright Bike 2011 model, User Manual, Page: 11 / 16

Maintenance Maintenance Maintenance
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular maintenance is done. Worn or damaged
components must be replaced immediately or the equipment removed from service until the repair is made. Only manufacturer supplied components can be
used to maintain and repair the equipment.
This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice
is provided in accordance with California’s Proposition 65. If you would like additional information, please refer to our Web site at www.nautilus.com/prop65
To reduce the risk of electrical shock, always unplug the power cord and wait 5 minutes before cleaning, maintaining or repairing this machine.
Daily Daily Daily
Before each use, examine the exercise machine for loose, broken, damaged, or worn parts. Do not use if found in this condition. Repair or
replace all parts at the first sign of wear or damage. After each workout, use a damp cloth to wipe your machine and Console free of sweat.
Note: Note:
Note:
Avoid excessive moisture on the Console.
W W Weekly eekly eekly
Check for smooth seat slider operation. Clean the machine to remove any dust, dirt, or grime from the surfaces. If needed, sparingly apply
a thin coating of silicone lube to ease operation.
Note: Note: Note:
Do not use petroleum based products.
Monthly Monthly Monthly
Check pedals and crank arms and tighten as necessary. Make sure all bolts and screws are tight. Tighten as necessary.
YYYearly early
early
Replace the console batteries every 1 year (as necessary).
Maintenance Maintenance
Maintenance Parts
Parts
Parts
A Console H Data Cable O Flywheel
B Seat Slider (A20 only) I Console Mast P Brake Magnet
C Pedals J HR Cables Q RPM Sensor
D Crank Arms K CHR Sensors R Speed Sensor Magnet
E Battery Bay L Handlebars, Side (A20 only) S Levelers
F
AC Power Connector
M
Shrouds
T
Seat Post (A10 only)
G Machine Type Switch
N
Center Plates
U Adjustment Knob
11 11
11