background image

39

maInTenanCe

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do the 
necessary tasks.

Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular 
maintenance is done. Worn or damaged components must be repaired or replaced immediately. Only manufacturer 
supplied components can be used to maintain and repair the equipment.

  

To reduce the risk of electrical shock or unsupervised usage of the equipment, always 

unplug the power cord from the wall outlet and the machine and wait 5 minutes before cleaning, 
maintaining or repairing the machine. Place the power cord in a secure location.

Daily:

 

Before each use, examine the exercise machine for loose, broken, 
damaged, or worn parts. Do not use if found in this condition. Repair or 
replace all parts at the first sign of wear or damage. After each workout, 

use a damp cloth to wipe your machine and Console free of sweat.

Note:

 Avoid excessive moisture on the Console.

Weekly:

 

Check for smooth roller operation. Wipe the machine to remove dust, 

dirt, or grime. Clean the rails and surface of the rollers with a damp 
cloth.

Note:

 Do not use petroleum based products.

Monthly  
or after 20 hours:

 

Make sure all bolts and screws are tight. Tighten as necessary. 

 

NOTICE:

   Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free of 

moisture.

Summary of Contents for 430 Elliptical 2013 model















































Reviews: