37
Dry or calloused hands
Sensors may have difficulty with dried
out or calloused hands. A conduc-
tive electrode cream such as “Signa
Crème” or “Buh-Bump” can help make
better conduct. These are available on
the web or at medical or some larger
fitness stores.
Handlebars
If tests reveal no other issues, Handle-
bars should be replaced.
Console displays “E2” error
code
Check data cable integrity
All wires in cable should be intact. If any
are cut or crimped, replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely
and oriented properly. Small latch on
connector should line up and snap into
place.
Console Electronics
If tests reveal no other issues, Console
should be replaced.
No speed/RPM reading,
Console displays “E3” error
code
Check data cable integrity
All wires in cable should be intact. If any
are cut or crimped, replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely
and oriented properly. Small latch on
connector should line up and snap into
place.
Check magnet position
(requires shroud removal)
Magnet should be in place on pulley.
Check RPM Sensor (re-
quires shroud removal)
RPM sensor should be aligned with
magnet and connected to data cable.
Realign sensor if necessary. Replace if
there is any damage to the sensor or
the connecting wire.
Console shuts off (enters
sleep mode) while in use
Check data cable integrity
All wires in the cable should be intact. If
any are cut or crimped, replace cable.
