28
3. The Console display shows the “Create Custom” prompt. Use the Increase/Decrease buttons
to move to the YES or NO option. To start setup of your Custom Workout, go to YES and push
START/ENTER.
To complete User Setup without a Custom Workout, go to the NO option and push START/
ENTER. Or push STOP. The Console goes back to the Power-Up Mode screen.
4. After you start the Custom Workout setup, the Program Display will show the left column
(workout interval) is active, with a default resistance level of 3. Use the Increase/Decrease
buttons to adjust the resistance level of the active interval. Push START/ENTER to record the
resistance level. The next column to the right becomes active.
Note:
The Console display shows the message “N of 20” during setup (N is the current
interval). The maximum number of intervals is 20.
5. Push and hold START/ENTER to complete the Custom Workout setup. The Console goes back
to the CUSTOM prompt. Push STOP to go back to the Power-Up Mode screen.
Edit User
1. From the Power-Up Mode screen, push START/ENTER and hold for 3 seconds to go to User
Setup Mode. If a User profile is set up, the Console will show a prompt to edit the user (EDIT
<Name>) or delete the user (DELETE <Name>). Use the Increase/Decrease buttons to move
through the Edit menu options, and push START/ENTER to make your selection.
To exit the Edit option, push STOP and the console will go back to the Edit and Delete
options.
2.
After you start the Edit function, the Console will show the Edit Name prompt. To edit the name,
push START/ENTER.
Note:
Use the Increase/Decrease buttons to move through the alphabet. To record each letter,
push START/ENTER. Push START/ENTER for a space.
Push and hold START/ENTER to complete the entry and go to the next data prompt. Or you
can tap the START/ENTER button to add spaces until the next data screen appears.
3. To edit the other User data, push START/ENTER at the screen prompt: EDIT AGE, EDIT
WEIGHT, EDIT GENDER. Use the Increase/Decrease buttons to adjust, and push START/
ENTER to complete each entry and go to the next prompt.
4. The Console display shows the CUSTOM prompt. To set up your Custom Workout, push
START/ENTER and go to Step 4 in the “Add User” section.
To complete User Setup without a Custom Workout, push STOP. The Console goes back to
EDIT USER prompt. Push STOP to go back to the Power-Up Mode screen.
