background image

1

  Safety

WARNING!

FAILURE TO FOLLOW THE SAFETY INSTRUCTIONS LISTED BELOW 

MAY RESULT IN SERIOUS INJURY OR DEATH. Always read and 

understand the information and warnings in this manual before 

using the Bicycle Trailer. 
If you are unsure of any information in this manual or have a 

question regarding assembly or use please call customer service. 

Always keep this manual for reference and include it with resale 

of the Bicycle Trailer.

ASSEMBLY

•  An adult who has read and understands the information and  

warnings in the manual shall assemble this product according  

to manufacturer’s instructions.

•  Do not use the product if there are any missing or damaged 

parts. Do not return the product to the store. Please contact 

customer service at 1-800-242-6110 for assistance and 

replacement parts.

•  There are pinch points between the sidewalls and the frame 

of the trailer that may cause injury. Fold or unfold the trailer 

slowly using caution.

•  Dispose of all plastic bags and wrapping material immediately.

SAFE RIDING WARNINGS

•  Weight limit is 100 lbs. Do not carry loads exceeding 100 lbs,  

as the extra weight and height will increase the center of 

gravity, increasing the risk of tip over

•  Do not carry items that exceed the trailer’s frame by more 

than 8” (high). Carrying taller loads will increase the trailers 

center of gravity and increase the risk of tip over. Be sure to 

always keep the center of gravity as low as possible

•  Do not carry humans or pets in this trailer 
•  Do not ride bicycle at excessive speeds as it increases the risk 

of the trailer tipping

•  Avoid riding with the trailer on icy or slippery terrain, or when 

inclement weather makes bicycling unsafe

•  Avoid riding on sloped terrain, with wheels perpendicular  

to the slope. Doing so will increase the likelihood of the  

trailer tipping

•  Never tow trailer with any motorized vehicle 
•  Riding with this trailer increases your turning radius. Be sure  

to allow for extra clearance around curbs, signs, cars, and 

other obstacles.

•  Make sure tow bar safety strap is properly secured, for 

additional safety 

1      Schwinn Cargo Trailer • model 13-SC320

Summary of Contents for 13-SC320



























Reviews: