PART 2
- 1 -
All rights reserved. Reproduction - in whole or in par t - only with the ex press wri tten permi ssion of SCHWING GmbH.
004.105.01-en
SCHWING – Control system " VECTOR "
TEACH MODE
The present summarized instructions are intended to serve as a 'memory aid'. They do not
refer to any particular type of machine and do not relieve the user of familiarizing himself with
the operating manual of the machine in question.
ATTENTION: RISK OF ACCIDENTS AND DAMAGE
The activities described in the present summarized instructions may only be performed by
specially trained persons having demonstrated their ability to do such work.
SCHWING does not assume any liability for damage resulting from inappropriate attempts
to perform machine adjustments.
The movement speeds must not be increased beyond the maximum values preset at the
factory.
The electronic key used for boom speed programming is identified by the system and the
key number is saved in the machine-specific parameter set. Persons authorized for pro-
gramming of the system are obliged not to hand this key over to non-authorized persons.
For controlling of the the truck-mounted concrete pump during testing and adjustment, the
operating instructions of the machine concerned and of the pertaining radio remote-control
unit must be observed.
For training please contact:
SCHWING GmbH
After-sales service
Postfach 200362
D - 44647 Herne
Tel.
: +49 (0)2325 / 987-0*
Fax
: +49 (0)2325 / 74674
Telex : 820352
or your local SCHWING representative.
