Spare Parts
VarioProtect 3XL-W Digital TC | Version 1.02 | EN
19
15 Spare Parts
15.1 Ordering spare parts
The spare parts may be purchased with the authorised
dealer or directly with the manufacturer. Please find the
corresponding contact data in Chapter 1.2 Customer
service.
Indicate the following basic information for requests or
orders of spare parts:
- Type of device
- Item number
- Position number
- Year of construction:
- Quantity
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
Spare part orders which do not include the above indica-
tions may not be taken into consideration. If the indica-
tions regarding the mode of dispatch are missing, the
product is dispatched at the discretion of the supplier.
You will find information regarding the device type, item
No. and year of manufacture on the type plate fixed to
the welding helmet.
Example
The outer pane for the welding helmet VarioProtect 3XL-
W Digital TC must be ordered. The outer pane has the
position number 19 in the spare parts drawing.
When ordering spare parts, send a copy of the spare
parts drawing with the marked component (outer pane)
and marked position number (19) to the authorised de-
aler or the spare parts department and provide the follo-
wing information:
Type of the device:
VarioProtect 3XL-W Digital TC
Item number:
1654030
Position number:
19
DANGER!
Danger of injury by the use of
wrong spare parts!
Dangers may result for the user and damages as
well as malfunctions may be caused by using wrong
or damaged spare parts.
- Only use original spare parts of the manufacturer or
spare parts admitted by the manufacturer.
- Always contact the manufacturer in case of uncer-
tainties.
Tips and recommendations
Use of non-approved spare parts will invalidate the
manufacturer's warranty.
