novoSchwank shape L
50
Version 008 nov
o
shape L 38/19
_I
N
T Te
chnical speci
ficati
o
n subjec
t t
o
change
Reflector elongation
Vertical elongation of reflectors b=415 mm for
thermal protection.
The numbers of reflector elongation [single sheets]
is depending on required protection [one side
both side, protection length] and the power of
the radiant heater.
Delivery scope
The required reflector elongation can be
compiled depending on the extent of necessary
protection out of the following basic elements:
02676300
reflector elongation L= 3000 mm
02676320
reflector elongation L= 1500 mm
Assembly instruction
1.
Complete assembling heater with reflectors
complete [see chapter 9, page 21-24].
2.
Mount bolts with spacer sleeves and mounting
brackets
A
at required positions [Fig. 48].
3.
Place reflector elongation
B
on mounting
brackets
A
and bolt them together with
reinforcement plates
C
[self-securing nut M8]
[Fig. 48].
4.
Bolt reflector elongation loosely together at
overlapping by means of M8 bolt/nuts.
5.
In case of one-sided load on bolts mount
additional mounting bracket
E
[Fig. 49].
In the case of heaters with end reflector
the last hanger at the burner side must be
placed at the junction of the reflector
and the end reflector
.
Fig. 48: Mounting of reflector elongation on hanger
Fig. 49: Mounting of reflector elongation on first hanger with
additional bracket
A
C
B
D
