background image

Remark: Up to 16 lamps can be trained.

2. Unpairing light(s)

Press group all key “1-2” + red reset button for 3 seconds that you want the light(s) to unpair. 

Remote control gets close to light about 10 cm 

distance for touch link.

3. Group Selection

Press the group selection button to select the group(s) you want to control

4. ON/OFF

ON/OFF: Every single press turns all the lights in selected 

group(s) ON or OFF gradually.

USER MANUAL ZHF02

REMOTE CONTROL 
FOR THE LED LAMP SERIES

ZHF02

BDA_ZHF02_a

Congratulations and thank you for purchasing the Schwaiger ZHF02 product. Below 

you will find useful operating guidelines.

REMOTE CONTROL & CONNECTED BULB

5.Dimming

Dimming: 

Dim the light(s) in selected group(s).

UP/DOWN button

Every press:  dims the lumen step by step until 

 

 max./min.

Keep pressing: dims until max./min. in one time.

Remark: 

There are totally 13 brighness diming level

Reset Button

Switch between dimming 

function and color  

temperature

RGB +

RGB –

Group 2

Group 1

ON-OFF

Brightness /  

Color Temperature –

Brightness / Color  

Tempe

All groups

Bulb(s) could be restored to factory default status either by remote or by wall switch. Factory 

default by remote is same as un -pairing Bulb(s), while by wall switch is as following.

Technical data: 

Frequency band: 2405-2480 MHz (ZigBee), Transmission power: < 7 mW

Disposal

Do not dispose of batteries or electric and electronic devices in the normal household 

waste. The consumer is legally obliged to return electrical and electronic devices and 

batteries that are at the end of their useful life to the point of sale or public collection 

points that have been set up for this purpose. Legislation in the country of use governs 

individual details regarding disposal. The symbol on the product, the user guide or the packaging 

indicates this legal requirement.

Simplified declaration of conformity as per the RED Directive

Schwaiger GmbH hereby declares that the described radio system product complies with Direc-

tive 2014/53/EU and other directives applicable to the product. The complete EU declaration of 

conformity is available online at: http://konform.schwaiger.de

1. Commissioning (Pairing) Light(s)

Commissioning (Pairing) Light(s): Follow instruction below to commission new smart light(s). In 

case you buy new smart light(s) or the current smart light(s) are set to Factory Default.

ON

OFF

Light(s) blinks twice,

Once commissioned to 

a remote, it’s no longer 

visible to other remotes

Light(s) (Factory 

Default) must start On

With your 

Remote

Restarted by wall switch

Successfully 

paired
to Remote

Fail

Press and hold the 

button of the group 

to which you want 

to add the light(s) 

for 3 seconds until 

the status indicator starts to blink. 

Please make sure that during this 

process, the remote is close to the 

light (distance of about 10 cm).

In case of a time-out,

the light(s) will turn

off the radio and 

become a standard

non-controllable 

light(s)

Group 2

Group 1

All Groups

ON

OFF

5x

10s

10s

2s

2s

2s

2s

2s

2s

1s

1s

1s

1s

1s

1s

on  1 second
off  2 seconds
on  1 second
off  2 seconds
on  1 second
off  2 seconds
on  1 second
off  2 seconds
on    second
off  2 seconds
on

Starting 

from

wall 

switch 

OFF

Light(s) 

finishes 

On

Factory 

Default

Restarted by wall switch

Blinks 

twice

User connects 

light(s) to new 

network(remote)

Or after 

5 min

User flips the wall 

switch off and

on 5x over 

with 1-2 seconds 

in between

Bulb is 

added to

device list as 

new device

ON

OFF

1x

Network is 

closed

Status Indicator:

  Remote is in Standby mode 

 

or Selected Group is OFF

  Selected Group is ON

  Finding Network Channel

(slow)   (when batteries are inserted)

  Commisioning a bulb

(fast)

Dim up

Quick toggling between 

highest and lowest 

dimming level & 

toggling CCT 

Dim down

CCT button

Short press:  adjusts the CCT step by step until max./min

Long pressing: adjusts the CCT until max./min. in one time

6.Reset remote control to factory default

Press “ON/OFF” key + red reset button for 3 seconds. The remote control will be reset to factory 

default.

RESETTING BULB(S) OF THE HAL SERIES

Restored to factory default by switch

MANUFACTURER INFORMATION

Dear Customer,

should you require technical advice 

and your retailer could not help 

please contact our technical support.

Schwaiger GmbH   

Würzburger Straße 17

90579 Langenzenn

Hotline: +49 (0) 9101 702-199 

www.schwaiger.de

[email protected]

Reviews: