37
B. Configure the Wi-Fi Repeater Mode with RJ45 Cable.
1. Plug the AP/Router into a wall socket. Connect your computer / laptop with the
AP/Router with RJ45 Cable.
2. Follow process
A3
to
A7
to configure your AP/Router.
Configure the Wireless AP Mode.
Use the AP Mode to obtain a „wire-
less access point“. The wireless end
devices will connect to the AP/Rout-
er in this mode. You can also use
this mode, for example, to make a
formerly non-wirelessenabled rout-
er wireless-enabled.
1. The mode selector must be set to
the
„AP/Repeater“
position for
AP Mode.
2. Plug the AP/Router into a wall
socket.
3. Follow process
A2
to
A4
.
4. After logging in, you will see the
web page on the right: Click on
the
AP
button in the Wizard field
The following message will be
displayed on your web browser:
LAN
