USER MANUAL LED220 011
9
DISPOSAL
The devices, accessories and packaging must be recycled in an eco-
friendly manner. Electrical appliances that cannot be used any
more can be handed over for recycling in shops. Do not throw
electrical appliances in the domestic trash. In accordance with
the European Directive 2011/65/EC on used electrical and
electronics appliances and its implementation in national law, electrical
appliances that have become unusable must be separated, collected
and given for eco-friendly recycling.
EC DECLARATION OF CONFORMITY
„Schwaiger GmbH hereby declares that the product LED220 011 con-
forms to the basic requirements and other relevant regulations of the
Directive 2014/30/EU.” The declaration of conformity can be found at
the following address: http://schwaiger.de/downloads
Guarantee information
The guarantee period begins with the purchase of the product. Please
confi rm this with your proof of purchase (receipt, invoice, delivery
receipt etc.). Please keep these documents in a safe place. Our gu-
arantee is based on our guarantee conditions in force at the time of
purchase. In the case of a necessary repair, take or send in the unit to
your specialist dealer.
Problem
Cause
Solution
Fixture does not
light.
1.ON/OFF switch Is not
set correctly.
2. Batteries are de-
fective.
3. Batteries are Instal-
led wrong.
4. Battery compart-
ment cover Is loose.
1. Slide ON/OFF switch
to ON position.
2. Replace the batteries.
3. Install the batteries
correctly.
4. Check battery com-
partment cover and/
or screw.
Light fl ickers on
and off.
Photo sensor Is picking
up extraneous light.
Remove batteries to
reset photosensor
settings.
Fixture stays on
all night.
Heat source / refl ective
body in detection area.
Remove heat source/
refl ective body from
detection zone or move
fi xture.
Motion sensor ac-
tivates at random
or for no reason.
1. Momentary heat
source or reflective
body.
2. Minor sensor
problem.
1. Turn sensor detection
field away from
source.
2. Remove batteries to
reset sensor.
Motion sensor
does not activate
at all.
1. Batteries are
depleted.
2. ON/OFF switch Is
set to OFF.
1. Check or replace
batteries.
2. Slide switch to ON
position.
Detection range
varies from day
to day.
Changes in
meteorological
conditions.
Adjust the position of
the sensor.
TROUBLESHOOTING GUIDE
Extreme hot or cold weather could affect the performance of the built-
in sensors that detect body heat. Certain winter clothing can shield
a person‘s body heat from the sensor during extreme cold weather.
During extreme hot weather, the sensor may not be able to distinguish
the difference between normal body temperatures and the surroun-
ding high temperatures. The sensor will begin working normally once
weather conditions return to normal.
