First-time installation
After.you.have.read.through.the.safety.information.and.successfully.carried.out.the.steps.described.in.
the.section.on.connecting.up.the.receiver,.plug.the.mains.adaptor.into.the.power.outlet..When.using.
the unit for the first time, you will see the welcome screen of the installation assistant. With the aid of
the installation assistant you can configure the most important settings on your digital receiver with
ease.
Menu language
In.the first step of the installation use the
CH
s
or.
CH
t
.buttons.
to. select. the. desired. language. (Deutsch,. English,. Italiano,. Polski,.
Français, Cestina, Türkçe, Magyar, Español) for all menus and confirm
this.with..
OK
.
Country
In.the.next.step.you.enter.the.country.in.which.you.are.using.your.digital.
receiver..Use.the..
CH
s
or.
CH
t
buttons.to.select.the.country.and.
confirm with
OK.
You. can. use. the.
EXIT
. button. at. any. time. to. return.
to.step.one.of.the.installation.if.you.need.to.correct.any.mistakes.
Antenna voltage
In.the.last.step.with.the.installation.assistant.use.the.
CH
s
or.
CH
t
.
buttons.to.select.whether.the.antenna.voltage.should.be.switched.on.or.
off.and.complete.the.installation.with.
OK.
.Once.again,.you.can.use.the..
EXIT
.button.to.make.corrections.
WARNING:
The. antenna. voltage. must. only. be. switched. on. if. the.
antenna actually is an active room antenna with signal amplifier and
does.not.already.have.a.mains.adaptor.of.its.own.(or.similar).to.supply.
it.with.power..Otherwise.this.may.result.in.a.short.circuit.or.may.destroy.
your.antenna.
.
The.automatic.channel.search.menu.will.appear.and.the.search.will.begin..During.the.search,.the.
message.Status:.scanning.will.be.displayed.in.the.window..The.newly.found.TV.channels.and.radio.
stations.will.be.listed..Once.the.search.is.complete,.the.message.Status:.complete..will.appear..Press.
EXIT
.to.leave.the.search.menu.
