Schwaiger DSR 6050 HD, Operating Manual, Page: 6 / 79

6
Safety instructions
Please read the safety instructions carefully before
operating the receiver.
Please follow all warnings and instructions indicated on
the equipment and in the operating manual.
Basic safety instructions
Electrical connection
•
Disconnect the receiver from the power source in case
of operational disruptions. Please note: The receiver
will remain live, even if it is turned off with the mains
switch on the rear side.
•
Do not expose the receiver to rain or any kind of
humidity to avoid risk of fire and electric shock.
•
Do not open the receiver. It could cause electric shock.
•
Connect the receiver only to a professionally installed
mains socket of 220 V –240 V ~, 50 Hz –60 Hz.
•
The total current at the antenna connection of the
receiver ‘LNB IN’ must not exceed 300 mA.
•
Pull out the mains plug from the socket if the
equipment is not in use for a longer period of time.
Only pull at the mains plug, not at the cable.
•
In case of storms pull out the mains plug of the
receiver from the socket.
•
In case of a storm, loosen the LNB cable from the
receiver.
•
If foreign bodies or fluids enter the receiver,
immediately pull out the mains plug from the socket.