Go to the Main Menu, select "Factory Preset".
Enter password upon request.
A warning message appears. Press "EXIT" to cancel or OK to confirm.
Start your individual channel search process, using "Auto Search" or "Manual Search" in the
"Installation" menu.
When using a active antenna, please make sure to set the "Antenna Booster Power" option to
"ON" in the "General Settings" menu before starting channel search.
9.18 Software Update / System Information
If necessary, this receiver can be updated with the latest software version. There are two ways of
doing this:
9.17 Factory Preset
This function will delete all channel data and all individual settings from the receiver, and all
settings will be reset to their default values.
9.16 Delete All Channels
This function will delete all channel data from the receiver. All other individual settings will be kept.
9.15 RF Modulator
The receiver can be connected to older TVs that do not have SCART sockets or separate
video/audio inputs. In this case the digital terrestrial TV signals are converted to standard
analogue TV signals by the RF Modulator. They are displayed using a regular aerial antenna lead
connected to the aerial antenna input of the TV set.
Note:
The quality of this signal transmission from the STB to the TV set is limited; the sound is
transmitted in "mono" only. It is recommended to use a different way of connection if at all possible
(e.g. SCART).
The correct settings for RF transmission can be adjusted with the menu items 9 in the menu
"General Settings". You can select the TV standard and the desired output channel of the RF
Modulator depending on your TV set. In Central Europe, the analogue TV standard PAL B/G is the
most common one. You can allocate any channel for RF output, provided it can be tuned to on the
connected TV set and is not already occupied by DVB-T program packets. Please refer to the
operating instructions of the TV.
Go to the Main Menu, select "Installation", select "Delete All Channels".
Enter password upon request
A warning message appears. Press "EXIT" to cancel or OK to confirm.
Start your individual channel search process, using "Auto Search" or "Manual Search" in the
"Installation" menu.
Connecting the receiver to a PC accordingly configured.
Cable Pin Configuration
(1) o --------- o (1)
(2) o --------- o (3)
(3) o --------- o (2)
(4) o --------- o (4)
(5) o --------- o (5)
9.14 Change Password
Select "Parental Lock Manager" from the Main Menu.
Select "Change Password"
Follow the instructions on the screen.
The factory default user password is '0000'. For improved security we recommend to create an
individual password, if needed.
GB
If you have lost your individual password you will need a master password which will unlock your
system again. Please contact your dealer or your nearest service station.
You need a data cable (RS 232C,cross type), special data
transmission software for your PC and the software update for
the receiver. Software updates can be obtained from the
SCHWAIGER website. Please check under
www.schwaiger.de
to see whether a more recent release for your STB is available.
Summary of Contents for DSR 6006T
Page 1: ...R ...
