24
DIGITAL SATELLITE RECEIVER
Menu Guide
6.
22KHz
:
Depending on the user’s antenna switch box or LNB.
You can supply either 22KHz by setting “
ON
” or not
by setting ”
OFF
”.
When selecting the U-LNB 1 and U-LNB 2,
the 22KHz will be dimmed.
7.
0V/12V
: Depending on the user’s antenna switch box.
You can choose either 0V/12V.
8.
Tone Burst
: Depending on the user’s antenna switch box.
(“off”, “SAT A” or “SAT B”)
9. Press the
BLUE
button to set Drive(Fine Drive or Normal Drive) to run the motor.
-
Fine Drive/Normal Drive :
To move the motor, press
LEFT/RIGHT
(
/
)
button.
-
Go to zero :
To move the zero position, press
OK(
)
button.
-
Store to location :
To store the current position, press
OK(
)
button.
-
East Limit :
To set the east limit by current position, press
OK(
)
button.
-
West Limit :
To set the west limit by current position, press
OK(
)
button.
-
Clear Limit :
To clear the stored limit value, press
OK(
)
button.
●
After selecting all that is necessary, press
RED
button to scan the satellite list.
Pop up widow will be displayed.
●
Select ON or OFF according to your Network.
●
Select All or FTA Search Type.
●
Press
OK
(
) button and searching will start.
Channel Search
ENGLISH
060615_k7 200 ENG sat_shw 6/15/06 6:01 AM ˘
` 24 mac-4 HP LaserJet 5100 Series T
