27
DIGITAL SATELLITE RECEIVER
Menu Guide
7.
0V/12V
: Depending on the user’s antenna switch box.
You can choose either 0V/12V.
8.
Tone Burst
: Depending on the user’s antenna switch box.
(“off”, “SAT A” or “SAT B”)
9.
Longitude
: Press the
NUMERIC
buttons and enter the Longitude.
When the
OK
(
) button is pressed. It can be toggled
East/West.
10.
Latitude
: Press the
NUMERIC
button and enter the Latitude.
When the
OK
(
) button is pressed, it can be toggled
North/South.
11. Press the
BLUE
button to set Drive(Fine Drive or Normal Drive) to
run the motor.
-
Fine Drive/Normal Drive :
To move the motor,
press
LEFT/RIGHT
(
/
)
button.
-
Go to zero :
To move the zero position, press
OK(
)
button.
-
East Limit :
To set the east limit by current position, press
OK(
)
button.
-
West Limit :
To set the west limit by current position, press
OK(
)
button.
-
Clear Limit :
To clear the stored limit value, press
OK(
)
button.
Note:
After the Degree, Longitude and Latitude is enterted accurately.
the DiSEqC Motor will automatically move to the satellite’s position.
●
After selecting all that is necessary, press
RED
button to scan the satellite list.
Pop up widow will be displayed.
●
Select ON or OFF according to your Network.
●
Select All or FTA Search Type.
●
Press
OK
(
) button and searching will start.
Channel Search
ENGLISH
061113_k7 200 ENG sat_shw 11/13/06 2:16 AM ˘
` 27 mac-4 HP LaserJet 5100 Series T