D. Setting Up 2.4GHz wireless AV Link
To enjoy wireless video and audio, just connect the transmitter to whatever
audio/video source you want to enjoy from another location, and connect the
receiver to the TV, monitor or powered speakers in that other location.
A/V link system is suggested to connect to following A/V equipment use:
Video sources
：
Audio sources
：
i
VCR
i
Compact Disk player or Changer
i
Cable set-top box (with A/V output)
i
Stereo Receiver
i
Satellite Receiver
i
Cassette Deck
i
Laser Disc Player
i
Camcorder or Miniature CCD Camera
i
Digital decoder
i
DVD
26
Make sure the ON/OFF switch is in the
c
OFF
f
position before
connection.
■
How To Transmit Audio/Video from Your VCR
5.
Connect VCR and transmitter using one of the provided A/V CABLE with
RCA plug, plug SCART to VCR output jack, RCA to transmitter. Please
follow the instruction figure below.
6.
Plug one end of the power adapter into the back of the transmitter and the
other end into any 230-volt wall outlet, Use only the adapter provided.
7.
If your VCR has only one set of A/V output jacks and you want to use it with
a nearby TV. Connect 75ohm RF coaxial cable from the modulator signal
OUT port on your VCR to the RF IN port on your TV. (Note: In order to also
view cable programs on that TV, connect your incoming cable TV source to
the IN port of the VCR.)
8.
Locate and orient the transmitter according to the section of this manual titled
"
Orienting Units for Optimum Performance
"
for best performance of
transmitter.
27
Summary of Contents for AVS5010 011
Page 17: ......
