8
Pointoselect Digital DT | Instruction Manual
Frequency range (partly divided through 128)
Nogier
Bahr
Frequencies of meridian
by Reininger/Bahr
A
2.3 Hz
1
4.6 Hz
1
6.44 Hz lung
B
4.6 Hz
2
9.4 Hz
2
4.32 Hz large intestine
C
9.1 Hz
3
18.7 Hz
3
3.68 Hz stomach
D
18.3 Hz
4
37.5 Hz
4
5.48 Hz spleen/pancreas
E
36.5 Hz
5
74.9 Hz
5
3.88 Hz heart
F
73.0 Hz
6
149.9 Hz
6
6.18 Hz small intestine
G
146.0 Hz
7
2.3 Hz
7
5.21 Hz bladder
8
4.77 Hz kidney
9
4.14 Hz circulation
10
5.72 Hz triple warmer
11
4.55 Hz gall bladder
12
3.45 Hz liver
Adjusting the pulse width
Press the left
+ / -
keys of the device to set the pulse width. The pulse width can be
adjusted in steps of 10 µs from 60 to 120 µs.
Start the stimulation
Stimulation can be carried out in every operating mode.
Press the
T
key of the hand probe to stimulate between the inner and outer
sensors. The parameters and the intensity used are the ones set up previously in
the S mode.
The letter „S“ for stimulation, the intensity in V and the frequency in Hz are
displayed on the screen. The red LED of the hand probe is lighting up.
The intensity can be modified during stimulation pressing the left
+ / -
keys on the device or the
+ / -
keys
of the hand probe. The frequency can be modified during stimulation using the right
+ / -
keys on the
device.
Adjusting the volume of the acoustic signal
Press and hold the
M
and the left
-
key and switch the device ON with the
key
to access this mode.
Adjust the volume level from 0 to 8 by pressing the left
+ / -
keys. The acoustic
signal is switched off with “0” and is at his maximum with “8”.
The symbol
indicates that the signal is deactivated.
Switching OFF the device
Press the
key to switch off the device. If the battery voltage falls below the critical value or the device
detects no valid measurements over a two-minute period and no stimulation is started, the device
switches off automatically.