28
schwa-medico
Operating Manual - AS SUPER 4 digital
Enter the selecting mode:
Press the
P
key for 4 seconds to enter the selecting mode.
This is indicated by an acoustic signal an shown on the
display by 2 different programs flashing in the illustration
beside.
Select a program for channels 1 and 2:
Press the
key of channel 1 to select the program group.
Press the
key of channel 2 to select the subprogram.
Select a program for channels 3 and 4:
Press the
key of channel 3 to select the program group.
Press the
key of channel 4 to select the subprogram.
The frequency and the pulse width of the selected programs also flash on the display.
If you do not make any changes for 4 seconds, the device automatically returns
to the stimulation mode. This is indicated by an acoustic signal. The stimulation
can then be started by increasing the intensity with the keys of each connected
channel.
Example: Selecting program 1.0 for channels 1 and 2 and program 1.3 for chan-
nels 3 and 4
Switch ON the device by pressing the key.
Press the
P
key until you have selected the program group no. 1.
Press the
E
key until you have selected the subprogram no. 0.
Press the
P
key for 4 seconds to enter the selection mode for the stimulation with
2 different programs. Both programs flash on the display.
Press the
key of channel 3 to select the program group no. 1.
Press the
key of channel 4 to select the subprogram no. 3.
4 seconds after pressing the last key, the device returns to the stimulation mode.
This is indicated by an acoustic signal.
The stimulation can then be started by increasing the intensity with the keys for
each connected channel.
Setting the intensity
Start the stimulation by increasing the intensity with the
▲
key of the channel(s) connected to the needles/electrodes.
Summary of Contents for AS SUPER 4 digital
Page 37: ...37 English ...
Page 38: ...38 schwa medico Operating Manual AS SUPER 4 digital ...
Page 39: ...39 English ...