Assembly
48
03.00|WDP-5X |en
Tightening torques for mounting VERO-S clamping pins type SPA
/ SPB / SPC
(Screw quality 12.9)
Screw size
M10
M12
M14
M16
Maximum admissible torques (Nm)
62
108
170
262
Clamping pin without collar SPA 40-OB, SPB 40-OB
The clamping pins without collar only require a slim fitting bore Ø
10 H7 in the installation space.
For the SPC 40-OB design, fit seating is not required.
Clamping pin installation SPA 40-OB
These clamping pins are designed for reduced machining forces
due to their shortened thread length. The functionality and the
selection for installation are described in the chapter "Clamping
pins SPA 40, SPB 40, SPC 40, SPG 40"
5.4.1
