SCHUNK VERO-S NSE3 138, Assembly And Operating Manual

Page: 8 / 68

Basic safety notes
8 08.00 | NSE3 138, NSE-T3 138 | VERO-S quick-change pallet system | en |
1152197 -NSE3 NSE-T3
2 Basic safety notes
2.1 Intended use
This product and the compatible add-on components are intended
solely for positioning and clamping workpieces or clamping pallets
on machine tools or other suitable technical devices.
• The product may only be used within the scope of its technical
data,
}
3 [
/
17] .
• The product is intended for industrial and industry-oriented use.
• Appropriate use of the product includes compliance with all
instructions in this manual.
2.2 Not intended use
The product is not being used as intended if, for example:
• It is used as a pressing tool, a toolholder, a load-handling device
or as lifting equipment.
• It is used for turning applications over 100 rpm without
consulting SCHUNK.
• It is used in working environments that are not permissible.
• People work on machines or technical equipment that do not
comply with the EC Machinery Directive 2006/42/EC,
disregarding the applicable safety regulations.
• The technical data specified by the manufacturer are exceeded
during usage.
2.3 Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
• Structural changes should only be made with the written
approval of SCHUNK.