General
6
03.00|1341130_ROTA NCR-A |en
Applicable documents
•
General terms of business*
•
Catalog data sheet of the purchased product *
•
Calculation of the jaw centrifugal forces, "Technology" chapter
in the lathe chuck catalog *
The documents marked with an asterisk (*) can be downloaded on
our homepage
schunk.com
Sizes
This operating manual applies to the following sizes:
•
ROTA NCR-A
190; 225; 250; 315; 400; 500; 630; 800; 1000
•
ROTA NCR-A with centrifugal force compensation
225; 250; 315; 400; 500; 630
Warranty
The warranty period is 24 months after delivery date from factory
or 500 000 cycles*, if it is used as intended, under the following
conditions:
•
Observe the applicable documents,
•
Observe the ambient conditions and operating conditions,
•
Observe the specified maintenance and lubrication intervals,
Parts touching the workpiece and wear parts are not included in
the warranty.
* A cycle consists of a complete clamping process ("Open" and
"Close").
Scope of delivery
1
Power Chuck
3
Fastening screws
(up to size 400)
6
Fastening screws
(from size 500 on)
12
T-nuts
for fine serration
12
Screws
for tongue and groove
1
Eye bolt
from size 250 and up
1
Operating manual
1.1.2
1.1.3
1.2
1.3
