SCHUNK PWG-plus 100, Assembly And Operating Manual

Page: 21 / 52

Assembly
09.00 | PWG-plus | Assembly and operating manual | en | 389495
21
5.2 Mounting the sensor
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is prepared for the use of sensors.
• For the exact type designations of suitable sensors, please see
catalog datasheet and Overview of sensors [
}
21].
• For technical data for the suitable sensors, see assembly and
operating manual and catalog datasheet.
– The assembly and operating manual and catalog datasheet
are included in the scope of delivery for the sensors and are
available at schunk.com.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
5.2.1 Overview of sensors
Designation PWG-plus
50 64 80 100 125 160 200 240
Inductive proximity
switch IN 40 X X X X X X X X
Inductive proximity
switch IN 80 X X X X X X X X
Magnetic switch MMS 22 X X X X X X X X
Programmable magnetic
switch MMS 22-PI1 X X X X X X X X
Programmable magnetic
switch MMS 22-PI2 - X X X X X - -
Programmable magnetic
switch MMS-P 22 X X X X X X - -