SCHUNK PLG 120, Translation Of Original Operating Manual

Page: 31 / 44

Assembly
6.3 Mounting the sensor
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is prepared for the use of sensors.
• For the exact type designations of suitable sensors, please see
catalog datasheet and
}
6.3.1 [
/
31] .
• For technical data for the suitable sensors, see assembly and
operating manual and catalog datasheet.
– The assembly and operating manual and catalog datasheet
are included in the scope of delivery for the sensors and are
available at schunk.com.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
6.3.1 Overview of sensors
Designation PLG
20 30 50 75 120
Inductive proximity switch IN 80 X X X X X
Variant IOL
NOTE
• The variant with integrated sensor system (IOL) has a sensor
integrated in the gripper. The positions can be monitored over
the entire stroke via the IO-Link interface,
} 6.2.3.1 [
/
30] .
31 02.00 | PLG | Assembly and Operating Manual | en | 1517334