Maintenance
7.5 Assembling the product
Assembly takes place in the opposite order to disassembly.
Observe the following:
• Unless otherwise specified, secure all screws and nuts with
Loctite no. 243 and tighten with the appropriate tightening
torque.
7.6 Tightening torque for screws
Position of the item numbers
Values in Nm
Item
MPZ 16
MPZ 20
MPZ 25
MPZ 30
MPZ 38
MPZ 45
18
-
-
-
1.1
2.4
2.4
19
-
-
-
2.2
5.8
12.0
20
0.3
0.6
1.3
0.18
0.18
0.18
21
0.3
0.6
1.3
-
-
-
22
0.1
-
-
-
-
-
23
0.1
-
-
-
-
-
24
0.1
-
-
-
-
-
38
-
-
-
0.6
1.1
2.6
39
-
-
-
2.2
5.8
12.0
49
-
-
-
0.8
2.2
5.9
94
-
-
-
1.1
2.4
2.4
7.7 Assembly drawing
The following figures are example images.
They serve for illustration and assignment of the spare parts.
Variations are possible depending on size and variant.
*
Positions are adapted to each other and can not be
replaced by the customer.
**
Wearing part, replace during maintenance.
Included in the seal kit. Seal kit can only be ordered
completely.
*** Contained in accessory pack.
41
09.00 | MPZ | Assembly- and Operating Manual | en | 389218
