Assembly
4 Assembly
4.1 Mechanical connection of a GSW-B into a toolholder
CAUTION
•
The orientation of the GSW-B in the toolholder must be
determined by the customer.
NOTE
Never use a shrink fit chuck.
Assembly options
1. Check if the O-rings (165) are insert in the shank. If necessary,
insert the O-rings (165).
2. Clamp the module with the shank or via the clamping surface (1)
into the toolholder.
17
05.00 | GSW-B | Assembly and Operating Manual | en | 389112
