Maintenance
26
03.00 | GM 80 – 201 | Assembly and Operating Manual | en | 389092
WARNING
Risk of injury due to spring forces!
The side cover plates are under spring tension.
Carefully clamp the module between the cover plates and release
the screw connection. Slowly unclamp the springs and remove
the cover plates.
Disassemble the module as shown in the "Assembly drawing",
As-
sembly drawing
[
}
27].
7.4 Servicing and assembling the module
WARNING
Risk of injury due to spring forces!
Use suitable devices and aids for assembly of the springs for
version AS.
NOTICE
Material damage due to improper assembly!
•
When mounting loads, do not allow impermissible forces and
moments to be exerted (see catalog data sheet).
•
Select a suitable tightening torque when assembling the
product or loads on the product in accordance with the
generally accepted guidelines for screw connections.
•
Secure all screws using a suitable chemical screw lock.
Maintenance
• Clean all parts thoroughly and check for damage and wear.
• Clean and re-lubricate the accessible mechanism of the gripping
module at the prescribed intervals.
Lubricants/Lubrication points (basic lubrication)
[
}
25]
• Oil or grease bare external steel parts.
• Disassemble the gripping module only for repairs
Disassembly
of the module
[
}
25]
Assembly
Assembly takes place in the opposite order to disassembly.
Observe the following:
• Unless otherwise specified, secure all screws and nuts with
Loctite no. 243 and tighten with the appropriate tightening
torque.
• Select suitable tightening torque values for screws when
assembling the module in accordance with the generally
accepted guidelines for screw connections.
