SCHUNK ELB 70-H075, Assembly And Operating Manual

Page: 101 / 108

Troubleshooting
05.00 | ELB | Montage- und Betriebsanleitung | en | GAS 376437
99
8 Troubleshooting
8.1 Product does not move
Possible cause Corrective action
Electrical connection incorrect e.g. Phase
rotator. Electrical connection according
specifications e.g. carry out circuit diagram.
Error in the drive controller. See documentation for drive controller.
8.2 Product does not achieve the cycle times
Possible cause Corrective action
Attachments on the product have too much
mass. Check cycle time calculation.
Specifications made by control unit are not
correct. Correct specifications.
Error in the drive controller. See documentation for drive controller.
8.3 Product gets too hot
Possible cause Corrective action
Temperature sensor not connected
properly. Check electrical connection.
Attachments on the product have too much
mass. Check cycle time calculation.
Error in the drive controller. See documentation for drive controller.