SCHUNK DPG-plus 100, Assembly And Operating Manual

Page: 47 / 80

Maintenance
28.00 | DPG-plus | Assembly and Operating Manual | en | 389031
47
7.4 Threadlocker
Position of the item numbers,
Assembly drawing (previous version) [
}
65]
• Secure the screws and nuts listed in the table with the specified
adhesive and tighten with the tightening torque,
Tightening torque for screws [
}
62].
Adhesive Item
Weicon 302-41 (41) (42) (46)
Weicon 302-43 (40) (43) (45)
Weicon 302-70 (2) (7) (13)
Equivalent greases/adhesives/surface-sealing pastes from other
manufacturers can also be used.
7.5 Greasing pistons and guides
Size 380
For size 380, the guides must be greased during each maintenance
interval across all four greasing areas at the housing (1) and the
piston via the greasing area at the piston (2).
Ø
Remove the locking screws (3)
Ø
Insert the lubrication nipple (4) into the housing
Ø
Lubricate the gripper at four greasing areas (1) and at greasing
area (2)
Ø
Remove lubricating nipple (4) again
Ø
Insert the sealing plugs (3)