Assembly and Operating Manual
AGE-F-XY
– Compensation Unit with spring return
3
Date printed 28.12.2009
1
Safety
1.1 Explanation of symbols
This symbol is displayed wherever there is a possibility of
danger to life and limb
.
This symbol is displayed wherever there is a possibility of
damage to the unit
exists.
This symbol denotes
important information
about the product and its handling.
1.2 Intended use
The module is intended for installation in a machine.
The requirements of the applicable guidelines must be observed and complied with.
The unit may be used only within the range of its technical data.
Any other use is deemed improper and unintended use. The manufacturer will not be
liable for any damages resulting from improper use
1.3 Environmental and operating conditions
-
Use the module only within the application parameters defined in the Technical Cata-
log. The most recent version applies (according to the General Terms and Conditions).
-
Clean ambient conditions at room temperature are required. If these conditions are not
ensured, the maintenance interval will be shorter, depending on the actual utilization.
-
The environment must be free of splashing water and vapors, and also of abrasive
dust and process dust. This does not apply to units designed especially for dirty envi-
ronments.
