SCHUNK 1521944, Assembly And Operating Manual, Page: 8 / 48

Basic safety notes
8 01.00 | RCE | Assembly and Operating Manual | en | 1458727
2 Basic safety notes
2.1 Intended use
The product is intended exclusively for machining workpieces with
a robot.
• The product may only be used within the scope of its technical
data, } 3 [
/
16] .
• The product is intended for installation in a machine/automated
system or for attachment to a robot. The applicable guidelines
for the machine/automated system must be observed and
complied with.
• The product is intended for industrial and industry-oriented use.
Its use outside enclosed spaces is only permitted if suitable
protective measures are taken against outdoor exposure. The
product is not suitable for use in salty air.
• Appropriate use of the product includes compliance with all
instructions in this manual.
• Any utilization that exceeds or differs from the appropriate use
is regarded as misuse.
2.2 Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
• Structural changes should only be made with the written
approval of SCHUNK.
2.3 Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
• Use only original spare parts or spares authorized by SCHUNK.