SCHUNK 1487754, Assembly And Operating Manual

Page: 10 / 40

Fundamental Safety Instructions
10 01 | Matrix-Plate SMPL | Assembly- and Operating Manual | en-US | 0489081
• Safety features must not be disabled under any circumstances.
SCHUNK assumes no liability for consequences of modifications
over which it has no control.
2.8 Responsibility of the Operating Company
The operating company is obligated to perform a risk assessment
for the environmental conditions at the installation location.
The operating company is responsible for mounting the Matrix-
Plate on the machine table. It is therefore responsible for ensuring
that the Matrix-Plate is correctly mechanically attached, that the
pneumatic connections are in good condition and that pneumatic
monitoring (gauge) is working.
The operating company is also responsible for third parties in the
working area of the machining center and the Matrix-Plate. The
operating company must ensure that they have the appropriate
qualifications and skills.
• Ensure that the Matrix-Plate cannot be started up by
unauthorized persons.
• Ensure that the machining center cannot be operated during
maintenance or repair work on the Matrix-Plate.
• Clearly define the responsibilities for the various activities
performed with the gripper.
• Ensure that these responsibilities are observed.
2.9 Country-Specific Regulations for the Operating Company
1. Observe the country-specific regulations regarding accident
prevention, safety testing and environmental protection.
2. The product is used in combination with a machine tool/
machining center.
Ensure that the appropriate country-specific regulations and
safety regulations are adhered to.