SCHUNK 1467375, Assembly And Operating Manual

Page: 6 / 52

General
6 03.00 | KSP3-IM, KSP3-LH-IM | TANDEM Clamping Block | en | 1474090
1.1.3 Sizes
This operating manual applies to the following sizes:
• KSP3 IM 100, 140, 160, 200, 250, 315
• KSP3-LH IM 100, 140, 160, 200, 250, 315
1.1.4 Variants
This manual applies to the following variants:
• Clamping force amplification for O.D. clamping (AS)
• Jig-machined positioning bores (Z)
1.2 Warranty
If the product is used as intended, the warranty is valid for
24 months from the date of delivery from the production facility or
500 000 cycles* under the following conditions:
• Observe the applicable documents,
}
1.1.2 [
/
5]
• Observe the ambient conditions and operating
conditions, } 2.6 [
/
8]
• Observance of the specified care and maintenance
instructions } 7 [
/
33]
Parts touching the workpiece and wear parts are not included in
the warranty.
* A cycle consists of a complete clamping process ("Open" and
"Close").
1.3 Scope of Delivery
Clamping force block
KSP3 IM, KSP3-LH IM
including inductive proximity switch
(without top jaws)
ACCESSORY KIT:
(for contents, see sealing kit list and parts list)
} 8.1 [
/
42]
1.4 Accessories
(see catalog or data sheets when ordering separately)
Top jaw blanks, type: STR, KTR
Supporting jaws, type: TBA-G
TANDEM Base plates
Valves, pneumatic screws
Extension cable for INW inductive proximity switch