24
4. Accessories.
4.6 Handlebar lock limiter
The handlebar lock limiter can be adjusted to
determine the direction of travel. In order to
adjust the handlebar lock limiter, please loo-
sen all grub screws (
A
) and bring the limiter (
B
)
into the required position. You can determine
the direction by moving both limiters (
B
) to-
wards the handlebar stop (
C
) and tightening
them.
If possible please leave the settings on the handlebar lock limiter as set at the
factory!
4.7 Holding bracket with mount
The holding bracket (
D
) with mount (
E
) per-
mits head, torso or pelvic supports to be
attached, which provide the tricycles with
additional stability. Included in the scope
of delivery is the black bracket adapter,
which is mounted onto the T-saddle post.
Then the holding bracket is pushed into the
holding socket (
F
) and can be adjusted in
depth. To do this, simply adjust the requi-
red position and then tighten the screws
(
G
). To change the angle of the back strap,
loosen the screw (
H
), remove it and insert it
into the desired hole (
I
) on the mount. Sub-
sequently tighten the screws (
G
) again.
The use of the holding bracket is exclusively
possible in combination with the T-saddle
post!
A
B
C
G
F
H
F
F
I
D
E
