Schumacher XI75DU Owner'S Manual Download Page 3

• 3 •

1. IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS.

1.1  SAVE THESE INSTRUCTIONS – 

This manual will show you how to use your converter 

safely and effectively. Please read, understand and follow these instructions and 

precautions carefully, as this manual contains important safety and operating instructions. 

WARNING: 

The converter output is 120V AC and can shock or electrocute the 

same as any ordinary household AC wall outlet.

WARNING: 

Pursuant to California Proposition 65, this product contains chemicals 

known to the state of California to cause cancer and birth defects or other 

reproductive harm. Wash hands after handling.

1.2 

Do not cover or obstruct the converter’s vents.

1.3 

Use the converter in a well-ventilated area.

1.4 

This converter is not intended for use by children.

1.5 

Do not expose the converter to rain or snow.

1.6 

Ensure that the converter is located away from normal traffic areas.

1.7 

Use only accessories recommended or sold by the manufacturer. 

1.8 

Do not operate the converter with damaged or undersized wiring.

1.9 

Do not operate the converter if it has received a sharp blow, been dropped or 

otherwise damaged in any way; take it to a qualified service person. 

1.10 

Do not disassemble the converter; take it to a qualified service person when service 

or repair is required. Incorrect reassembly may result in a risk of fire or electric shock. 

1.11 

Make sure the converter is not close to any potential source of flammable fumes, 

gases or clothing.

1.12 

Do not place the converter in areas such as battery compartments or engine 

compartments where fumes or gases may accumulate.

1.13 

Disconnect both AC and DC power from the converter before attempting any cleaning. 

1.14 

DO NOT operate the converter if you, the converter, the device being operated 

or any other surfaces that may come into contact with any power source are wet. 

Water and many other liquids can conduct electricity, which may lead to serious 

injury or death.

1.15 

Do not place the converter in direct sunlight. The ideal air temperature for 

operation is between 50° and 80°F.

1.16 

Only connect the power converter to a 12 volt accessory outlet or 12 volt battery. 

1.17 

Do not attempt to connect the converter to any other power source, including an AC 

power source. 

1.18 

Do not modify the AC or USB receptacle in any way.

1.19 

Do not try extending or otherwise changing the 12 volt power cord attached to 

your converter.

Summary of Contents for XI75DU












Reviews: