• 10 •
PROBLEM
POSSIBLE CAUSE
REASON/SOLUTION
Converter does
not turn on.
Poor contact at terminals
Fuse has blown.
Check for poor connection to
battery or power supply. Make sure
connection points are clean. Rock
clamps back and forth for a better
connection.
A blown fuse is usually caused by
reverse polarity or a short circuit
within the converter. Contact
a qualified service technician
to replace the fuse(s) with the
appropriate replacement(s).
10. SPECIFICATIONS
Maximum continuous output ................................................................. 750 Watts
Surge capacity (0.1 second) ............................................................... 1500 Watts
No load current draw ...................................................................................<0.5A
Input voltage range .................................................................. 10.5V – 15.5V DC
Output voltage range ...................................................................... 120V±5% AC
Optimum efficiency ........................................................................................85%
11. REPLACEMENT PARTS
12V accessory plug with cables ......................................................3899003535Z
Battery cable with clamps (red and black) ......................................3899003534Z
