• 15 •
EN
L I T H I U M - I O N T E C H N O L O G Y
5. CHARGING.
IMPORTANT! CHARGE THE WORK LIGHT IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE, AND AT LEAST EVERY 6 MONTHS.
Failure to do this will reduce the battery’s capacity and may void the warranty.
5.1 Connect the micro USB end of the charging cable to the micro USB port on the
back of the work light.
5.2 Insert the USB end of the cable into the USB port on the wall charger.
5.3 Plug the AC charger into a live AC outlet.
5.4 The charging LED will light RED, to indicate charging has begun.
5.5 When the battery is fully charged, the charging LED will change to GREEN.
5.6 Recharge the work light after use, and at least every 6 months.
6. OPERATING INSTRUCTIONS.
6.1 Hang the work light, using the hooks on the back. When hung from a single hook,
the work light can be rotated 360° for more precise positioning.
6.2 The magnets may be used instead. Attach to any ferrous metal surface.
6.3 Direct the lens away from your eyes before turning on the work light.
6.4 Press once to turn on the 1W end LED.
Press a second time to turn on the high-power SMD LEDs.
Press a third time to turn on the low-power SMD LEDs.
Press to turn off.
1.
Magnetic base
2.
ON / OFF Power switch
3.
5 SMD LED lights
4.
1W end LED
5.
Rotating (360 °) hooks
6.
Magnets
7.
Charging status indicator
8.
Ball joint for swivel and tilt
9.
USB/Micro USB charging cable
