•
4
•
5. FEATURES
1.
12V 3-pin socket for recharging
2.
12V DC port
3.
USB ports
4.
Battery clamps
5.
12V/USB button
6.
Charging LED indicator
7.
Digital display
8.
Jump Start button
9.
100~120V AC wall charger
10.
12V DC car charger
11.
12V port adaptor
1
2
3
4
5
6 7
8
9
10
11
6. CONTROL PANEL
DIGITAL DISPLAY
When the clamps are connected to a
vehicle’s battery, the digital display indicates
the battery’s voltage. When not connected
to a battery, the digital display is used to
indicate the percent of charge of the jump
starter’s internal battery. See
Display
Messages
for a complete list of messages.
NOTE:
If the vehicle’s battery voltage is
too low to detect, the display will remain
blank; the voltage will not display. A manual
start procedure is required to enable
the jump start function. See Section 8.2,
Starting a Battery with Low Voltage
.
NOTE:
During charging, the display will
go into sleep mode and will not display
any messages. To turn the display back
on, press any button.
LED INDICATOR
• Green LED solid:
The internal battery is charging.
• Green LED flashing:
Charging has aborted.
• Green LED pulsing:
The internal battery is fully charged.
FUNCTION BUTTONS
12V/USB –
Enables the 12V DC
port and the USB ports
JUMP START –
Enables the jump start function
