background image

 2 

RiSk OF EXPLOSiVE GASES.

WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. 

1.13 

BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY 

OPERATION. FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT YOU 

FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE INSTANT POWER™.

To reduce the risk of a battery explosion, follow these instructions and 

1.14 

those published by the battery manufacturer and the manufacturer of any equipment 

you intend to use in the vicinity of the battery. Review the cautionary markings on these 

products and on the engine.
This Instant Power™ employs parts, such as switches and circuit breakers, that tend to 

1.15 

produce arcs and sparks. If used in a garage, locate this Instant Power™ 18 inches  

(46 cm) or more above floor level.

PERSONAL PRECAUTiONS

2. 

RiSk OF EXPLOSiVE GASES. A SPARk 

NEAR ThE BATTERY MAY CAUSE A 

BATTERY EXPLOSiON. TO REdUCE ThE 

RiSk OF A SPARk NEAR ThE BATTERY:

NEVER smoke or allow a spark or 

2.1 

flame in the vicinity of a battery or engine.

Remove personal metal items such as rings, bracelets, necklaces and watches when 

2.2 

working with a lead-acid battery. A lead-acid battery can produce a short-circuit current 

high enough to weld a ring or the like to metal, causing a severe burn.
Be extra cautious to reduce the risk of dropping a metal tool onto the battery. It might 

2.3 

spark or short-circuit the battery or other electrical part that may cause an explosion.
Do not permit the internal battery of the Instant Power™ to freeze. Never charge a 

2.4 

frozen battery. 
To prevent sparking, NEVER allow clips to touch together or contact the same piece of metal.

2.5 

Consider having someone nearby to come to your aid when you work near a  

2.6 

lead-acid battery.
Have plenty of fresh water and soap nearby in case battery acid contacts your skin, 

2.7 

clothing or eyes.
Wear complete eye and body protection, including safety goggles and protective 

2.8 

clothing. Avoid touching your eyes while working near the battery.
If battery acid contacts your skin or clothing, immediately wash the area with soap and 

2.9 

water. If acid enters your eye, immediately flood the eye with cold running water for at 

least 10 minutes and get medical attention right away.
If battery acid is accidentally swallowed, drink milk, the whites of eggs or water. DO NOT 

2.10 

induce vomiting. Seek medical attention immediately.

PREPARiNG TO USE ThE iNSTANT POWER

3. 

RiSk OF CONTACT WiTh BATTERY ACid. BATTERY ACid 

iS A hiGhLY CORROSiVE SULFURiC ACid.

Be sure the area around the battery is well ventilated 

3.1 

while the jump starter is being used.

Clean the battery terminals before using the jump starter. 

3.2 

During cleaning, keep airborne corrosion from coming into 

contact with your eyes, nose and mouth. Use baking soda and water to neutralize the 

battery acid and help eliminate airborne corrosion. Do not touch your eyes, nose or mouth.
Determine the voltage of the battery by referring to the vehicle owner’s manual and 

3.3 

make sure that the output voltage of the jump starter is correct.
Make sure that the Instant Power™ cable clips make tight connections.

3.4 

Summary of Contents for XJS22 INSTANT POWER


























Reviews: