• 6 •
8.3 USING AN EXTENSION CORD
The use of an extension cord is not recommended. If you must use an extension
cord, follow these guidelines:
• Pins on plug of extension cord must be the same number, size, and shape as
those of plug on charger.
• Ensure that the extension cord is properly wired and in good electrical condition.
• Wire size must be large enough for the AC ampere rating of charger, as
specified below:
Length of cord (feet)
25
50
100
150
AWG* size of cord
18
18
18
16
*AWG-American Wire Gauge
9. ASSEMBLY INSTRUCTIONS
9.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.
10. FEATURES
1.
LED indicators
2.
Battery clamp quick-connect
3.
Ring terminal quick-connect
4.
Quick-connect connector
1
4
2
3
11. CONTROL PANEL
LED INDICATORS
POWER (red) LED lit: There is AC power supplied to the battery charger.
CHARGING (yellow/orange) LED lit: The charger is charging the battery.
CHARGING (yellow/orange) LED flashing: The charger has detected
a problem with the battery.
CHARGED (green) LED pulsing: The battery is fully charged and the
charger is in maintain mode.
