background image

 10 

Using the Battery Voltage Tester

With the charger unplugged from the AC outlet, connect the charger to the battery 

1. 

following the instructions given in sections 6 and 7.
Plug the charger AC power cord into the AC outlet, following the instructions given in 

2. 

section 8.
Place the Function switch in the down position.

3. 

Make sure the LED on the timer is next to the OFF (O)

4. 

 

position.

Read the voltage on the digital display or press the Display Mode button to set the 

5. 

tester to BATTERY % to read the voltage as a percent of charge. Compare the 

voltage reading to the chart below.

12 Volt Battery Reading

Battery Condition

12.8 or More

Charged

12.2 to 12.7

Needs Charging

Less than 12.2

Discharged

Tester and Charger

: When first turned on, the unit operates only as a tester, not as a 

charger. To continue to use it only as a tester, avoid pressing the AUTO START

 

button 

or the TIMER button. Selecting a time or pressing the AUTO START button

 

activates the 

battery charger and deactivates the tester. 

Testing After Charging

: To change the battery charger back to a tester, press the Timer 

button until the LED next to the OFF position is lit. Then press the Display button until 

the VOLTS LED is lit.

Using the Alternator Performance Tester

With the charger unplugged from the AC outlet, connect the charger to the battery 

1. 

following the instructions given in sections 6 and 7.
Plug the charger AC power cord into the AC outlet, following the instructions given in 

2. 

section 8.
Place the Function switch in the down position.

3. 

Make sure the LED on the timer is next to the OFF (O)

4. 

 

position.

Start the vehicle and turn on the vehicle’s headlights. Read the voltage on the digital 

5. 

display. Compare the voltage reading to the chart below.

12 Volt Alternator Reading

Alternator Condition

14.6 or More

Have it checked

13.5 to 14.5

Working

Less than 13.4

Have it checked

CALCULATING CHARGE TIME

12. 

Find your battery’s rating on the chart below, and note the charge time given for each 

charger setting. The times given are for batteries with a 50% charge prior to recharging. 

Add more time for severely discharged batteries.
CCA = Cold Cranking Amps
RC = Reserve Capacity
AH = Amp Hour
NR means that the charger setting is NOT RECOMMENDED.

BATTERY SIZE/RATING

CHARGE RATE/CHARGING 

TIME

2 AMP

20 AMP

55 AMP

SMALL 

BATTERIES

Motorcycle,

garden,

tractor, etc.

6 - 12 AH

2 - 4 hrs

NR

NR

12 - 32 AH

4 - 10 hrs

NR

NR

Summary of Contents for SE-1555A



































Reviews: