31
1.
Cable with rod holder
2.
Ground cable (ground clamp)
3.
Welding current adjustment control (handle)
4.
ON/OFF selector switch
5.
Overheating indicator light
6.
Welding current control sight
7.
Transportation grip
FIGURE 8.1
The change of voltage 127/220 V is done by means of the selector switch located in the front part of the equip-
ment. According to the voltage provided by the local utility company, follow the procedures below:
7. MAIN COMPONENTS
8. OPERATION
Follow the instruction below in order to prevent risk of fi re, electric accidents or inju-
ries to the personnel involved in the activity.
• Never turn on the equipment to 220V of rated voltage if it is set to 127V. Caution: risk of fi re!;
• Keep the equipment disconnected from the power supply while changing the voltage. Adjust/change the
rated voltage during the operation of the equipment is prohibited!
ATTENTION
FIGURA 7.2
FIGURA 7.1
7
6
5
7
3
3
1
4
5
1
2
2
4