24
FIGURE 8.1
Setting the handle support and depth gauge:
1.
Turn the handle clockwise so that the handle support (fi gure 8.2) can slide on the front of the tool, as illus-
trated in fi gure 8.2. Set the desired position;
2.
Set the depth gauge (Item 8 - fi gure 7.1) in the mounting hole as illustrated in fi gure 8.3. Set the desired
drilling depth, tighten the handle support turning the handle clockwise.
Before any adjustment, check if the tool is unplugged from the power grid.
ATTENTION
Drilling method - “revolving or with impact”:
If your tool has this function, use the switch button to select
the drilling mode (item 3 - fi gure 7.1).
REVOLVING DRILLING: for drilling metal, wood and plastic.
DRILLING WITH IMPACT: Rotation and simultaneous impact for concrete and masonry.
Insertion, replacement or adjustment of accessories: (drills or bits):
1.
Unplug the tool from the power grid;
2.
Insert the base of the accessory into the chuck and with the help of the chuck key, tighten equally on the
three attachment positions (fi gure 8.1);
3.
Make sure the accessory was fi rmly installed and remove all used tools during installation;
4.
Let the revolving part of the tool free before connecting the plug to the power grid.
Accessories:
select the accessory in compliance with the work to be done. The performance of the tool will
depend on the choice and quality of the used accessory.