28
REPLACING FILTERS
Your vacuum cleaner has two fi lters, never use it without them. When necessary,
wash them with water and soap and let them dry. If the fi lter is damaged, replace it immediately.
IMPORTANT
To replace the fi lters, follow the instructions below:
1.
Release the side clips and lift the top lid by the handle;
2.
Remove the fi lters;
3.
Fit a new fi lter in the place (Figure 8.3);
4.
Place the top lid on the dust compartment again and lock the side clips.
Maintenance and cleaning:
Before performing any cleaning or maintenance, unplug the tool from the power grid;
After use, clean the tool with a damp cloth (do not pour water on the tool) and store it in a clean, dry place
protected from moisture and dust. Keep your tool out of reach of children and people unfamiliar with the use of
the equipment.
Transportation:
Do not pull or carry the tool by the electric cord or allow its contact with edges, sharp elements, rough surfaces,
oil or chemicals that may damage its fl exible and insulating properties;
Do not move the tool with the trigger locked in the “on” position;
Repairs:
If required to perform any repair or replacement of the electric motor brushes, contact the nearest Schulz assis-
tance. Original parts Schulz must be used. The use of non-original parts results in warranty loss and may cause
damage to the equipment or injury.
9. PREVENTIVE MAINTENANCE
To guarantee perfect operation and increase the lifespan of your equipment, follow the
recommendations below:
ATTENTION
Summary of Contents for ELEKTRO SCHULZ AGUA E PO 1400
Page 4: ...4...
