27
USING WITH LIQUIDS
The aspirated liquid stays in the dust compartment. When the liquid reaches the maximum level, the vacuum
cleaner will stop sucking and you will notice a change in the noise emitted by the product. It happens because of
the sealing fl oat, which prevents the liquid from getting in contact with the motor.
When this happens, follow the instructions below:
• Turn off the equipment immediately and unplug it from the power outlet.
• Empty the dust compartment and proceed with cleaning again.
NOTE:
Before putting the vacuum cleaner away after using it with liquids, dry it off. Leaving water inside it will
cause gradual damage.
BLOW FUNCTION
• Schulz wet and dry vacuum cleaners have the blow function (see outlet opening at the top part of the lid).
• Before using the blow function, check if your vacuum cleaner is clean and dry
.
• To use this function,
just connect the suction hose to the top outlet opening (Figure 8.2) and turn the product
on.
Never point the hose in the direction of people and animals. This might cause serious
accidents.
ATTENTION:
FIGURE 8.2
A
B
FIGURE 8.3
A - Foam fi lter
B - Filter cloth
Summary of Contents for ELEKTRO SCHULZ AGUA E PO 1400
Page 4: ...4...
