Schulz Speyer Concertina, Assembly Manual

Page: 19 / 24

19
Assembly guide
Assembly guide for Concertina
Safety instructions for the Desk Power System
Safe use of the system is possible only when the operating instruction are read completely, and the
instructions contained are strictly observed.
Failure to comply with instructions marked with “NOTE” may result in serious damage to the system
or one of its components.
NOTE: It is important for everyone who is to connect, install or use the systems to have the necessary
information and access to this user manual.
NOTE: If there is visible damage on the product it must not be installed
Before installation, de-installation or troubleshooting:
Stop the Desk Power System
Switch off the power supply and pull out the main plugs.
Relieve the Desk Power System of any loads, which may be released during the work.
Before start-up:
Make sure that the system has been installed as instructed in this user manual.
Make sure that the voltage at the control box is corrected before the system is connected to the
mains.
System connection. The individual parts must be connected before the control box is connected to the
mains.
During operation:
If the control box makes unusual noises or smells switch off the main voltage immediately.
Take care that the cables are not damaged.
Unplug the main cable on mobile equipment before it is moved.