52
EN
Water inlet
For the water connection, a normal
cold-water supply with at least 0,1 MPa
(1 bar) water pressure is required. When
the water tap is turned on, more than 8
litres of water per minute must flow out.
►
If the water pressure is over 1 MPa
(10 bar), a pressure valve should be
fitted.
Important
►
Do not connect to the mixing battery of
a pressureless hot-water apparatus.
Hoop up the machine with like new inlet
hoses. Do not reuse old hose kits.
►
Do not kink or protract the hoses.
►
Connect the inlet hose to the water tap.
►
Do not remove the screens in the hose
connections, except for cleaning.
►
Carefully turn on the water tap to make
sure that the connections are not
leaking.
Important
The connecting points are under full
water pressure.
In order to avoid water damage, the wa-
ter tap and the intermediate valve must
be closed after washing..
Soft water/ rainwater connection
Notice
If you wish to use rainwater, this must
be filtered or hygienically clean to avoid
contamination.
►
A rainwater utilisation system is required
to operate your washing machine with
rainwater.
Machines with soft water/ rainwater
option provide two water con nections
on the rear panel for the soft and hard
water connection (cold) respectively.