Summer noise level (ex factory Volume 2)
Select «Extended basic settings»!
With the Alarm setting switched on, a signal sounds at
regular intervals at the end of the programme.
The level can be adjusted in 3 levels.
Off
Level 1
Level 2
Level 3
Standby function (ex factory ON)
Select «Extended basic settings»!
When the standby function is switched on, the controls
switch off when no drying programme is running in
energy saving mode. All displays are dark.
Optical interface (ex factory OFF)
Select «Extended basic settings»!
If the optical interface (SCS) is switched on, customer
services can communicate with the machine by PC.
Default language (ex factory GERMAN)
Select «Extended basic settings»!
If another language is temporarily selected via the
select-language button
button or the buttons
and
, 4 minutes after programme end, in standby
mode or after a long standstill, the setting reverts back
to the default language.
Cleaning and Maintenance
Cleaning the air cooler
The air cooler should be cleaned after every 10th drying
procedure.
1.
Press the button to release the maintenance flap.
2.
Turn the two closing levers in the indicated direction
against each other.
3.
Pull out the air cooler.
4.
Rinse the air cooler thoroughly under running water and
allow to drain
5.
Replace the air cooler. The handle must be at the
bottom. Turn the lock levers back again to lock.
6.
Push the upper left edge of the maintenance flap until
the lock engages.
33
