Assembling Process
Proceso de montaje
Step 1: Fix the Heater Pole on the base by using the provided
3PCS of M6 * 25mm screws.
Complete!
Operation
Connect the power cable to a 13 amp supply that is located in a
safe, dry area.
The switch on the heater is used to control the Heating and light
and speaker, the left position for LED light and speaker, the right
position for heater 1500W.
Warning! Please remove the PE bag before using!
Please take down the insulation sheet before use
the Remote Control. The battery model of Remote
Control is Lithium Cell CR2025
.