24
4. Accessories.
Depth adjustment
For the pelotte pads that can be adjusted
in depth (for the contourable upper body
support), it is also necessary to adjust the
depth. To set the depth, loosen the
hexagon socket screw (
A
) on the respective
pelotte pad and bring the respective pelotte
pad into the desired position.
After each adjustment tighten the hexagon socket screws again!
4.4 Contourable upper body support
The contourable upper body support for
till.
in sizes 3+4 is equipped with a spring
mechanism. It is divided into three areas
(shoulder, thorax and hip). For each area
there is a corresponding locking lever with
the help of which adjustments specific to the
user`s body can be fixed.
The following levers must be used for the following areas:
• Lever
B =
hip
• Lever
C =
thorax
• Lever
D =
shoulder
Before the user is positioned on the supine
standing frame, please loosen the three locking
levers (
B
,
C
and
D
), by moving the levers upwards.
This makes the upper body support flexible. Once
the user has assumed his position on the supine
standing frame, close the locking levers again. The
contouring of the upper body support defined by
the user is thus fixed. If needed, the upper body
support can be changed at specific points to
release pressure from particular body regions or to
apply pressure. To do this, release the locking lever
for the respective area and, while the user is in
position, press the pads into the desired position and lift the respective
body area. Afterwards close again the locking lever.
Ensure for each adjustment that all limbs are outside the adjustment areas /
locking levers. Risk of entrapment!
C
B
D
A
C
B
D